CP30 Air, Oil And Can Crusher
Recommended For
Service Centres
Spray Shops
Food Manufacturers
Benefits of the CP30
Specifications
- It’s ideal for businesses that have limited space as the unit has a similar footprint to a pallet.
- Each unit has low power consumption, safe and easy operation with low noise levels.
- The CP30 will crush up to 30L drums to approximately 20% of their original size.
- Crush air and oil filters. Reduce their size by a 5:1 compaction ratio.
- 8 tonne compaction force.
- Extensively reduce the volume of bins needed while freeing up additional floor space.
- Machine dimensions with stand: 2540mm H x 1105mm W x 680mm D.
- Machine dimensions without stand: 1435mm H x 615mm W x 680mm D.
- Chamber dimensions: 475mm H x 350mm W x 350mm D.
- Machine weight: 245 kg.
- Cycle time: 35 seconds.
- Compaction force: up to 8 tonnes.
- Power: single phase 220 V 50 Hz 1.5 kW motor.
- Noise level: 70 dB.
- IP54 Standards.
Specifications
- Machine dimensions with stand: 2540mm H x 1105mm W x 680mm D.
- Machine dimensions without stand: 1435mm H x 615mm W x 680mm D.
- Chamber dimensions: 475mm H x 350mm W x 350mm D.
- Machine weight: 245 kg.
- Cycle time: 35 seconds.
- Compaction force: up to 8 tonnes.
- Power: single phase 220 V 50 Hz 1.5 kW motor.
- Noise level: 70 dB.
- IP54 Standards.
CP30 Air, Oil And Can Crusher Details
Need something else? Check out some other equipment
Check out our Collection Systems
Select another category
FAQs for CP30 Can and Oil Filter Press
The CP30 Can and Oil Filter Press is a waste-management machine included in Smart Waste’s Small Specialty range. It is designed for pressing cans and oil filters as part of a business’s waste-handling process. Smart Waste lists the CP30 with an 8-tonne compaction force.
The CP30 is designed for crushing cans and pressing oil filters, providing a dedicated solution for businesses that need to reduce and manage these waste materials. It is listed by Smart Waste as one of its Small Specialty waste-management solutions.
The CP30 has an 8-tonne compaction force, according to the Smart Waste Small Specialty product listing.
The CP30 is specifically associated with cans and oil filters. Its product name and Smart Waste’s Small Specialty listing identify these as the primary materials for this equipment.
The CP30 can be considered by businesses that generate cans and oil-filter waste and need dedicated waste-management equipment for pressing these materials. Its suitability should be assessed according to the waste generated and the operational requirements of the site.
The CP30 provides a dedicated way to press cans and oil filters, helping businesses manage these waste materials more efficiently. Its 8-tonne compaction force is a key specification when evaluating the equipment for a waste-management operation.
Both machines are part of Smart Waste’s Small Specialty range, but they serve different waste streams. The CP30 Can and Oil Filter Press is designed around cans and oil filters, while the CP205 Drum Crusher is designed for drums up to 205 litres and very large air filters.
Yes. The CP30 is a specialised can and oil filter press, rather than a general waste compactor. Smart Waste places it within the Small Specialty category alongside dedicated equipment such as the G5 Glass Crusher and CP205 Drum Crusher.
The CP30 is most relevant when your operation needs equipment specifically for cans and oil filters. If your waste stream is instead primarily glass, drums or general waste, Smart Waste has separate equipment categories and products for those applications.
Yes. By providing dedicated pressing equipment for cans and oil filters, the CP30 gives businesses a specialised solution for handling these waste materials rather than relying on a general-purpose waste-management process.
The CP30 Can and Oil Filter Press is part of Smart Waste’s Small Specialty range. Other products in this category include the G5 Glass Crusher, CP205 Drum Crusher and Pallet Wrapper.
Smart Waste’s range includes dedicated equipment for different waste streams, including the CP30 for cans and oil filters, G5 for glass, and CP205 for drums. Comparing the material, you need to process with the equipment’s intended application is a practical starting point for selecting the appropriate solution.